Sethco magnetic drive, sealless, end suction pumps feature polypropylene construction for use in corrosive liquid applications. all pumps incorporate a special 99.5% Alumina ceramic shaft and appropriate o-rings. There is no metal contact with the liquid being pumped. Since the pump is magnetically driven, no shaft seal is required. Power is transmitted by a magnetic field from the magnet attached to the motor through the solid body of the pump to the magnet attached to the impeller. No shaft seals means no seal leaks and no air leaks. Leakage and troublesome seal replacement are completely eliminated. If later desired, self-priming chambers can be easily field added to provide this desirable feature. Completely corrosion resistant, the pump is recommended for acids, alkalies, caustics, sea water, solvents and many other difficult applications.
Unit of Measure


N/A 344-K35V


N/A Polypropylene (GFPY)

Max. Flow
(60 hz)

N/A 56 gpm

Max. Head TDH
(60 hz)

N/A 56 ft.

Max. Operating

N/A 180°F

Horsepower (50Hz/60Hz)

N/A 1

Motor Specifications

N/A 115/208-230V, 60Hz, 110/220V, 50Hz, 1ph, TEFC

O'Ring Seal

N/A Viton - STANDARD EPDM – N/C Teflon - $43 ($43.00)

Shaft Material

N/A 99.5% Alumina Ceramic

Bearing Material

N/A Carbon - STANDARD Silicon Carbide - $222 ($222.00)

Wet End Kits (Drive Magnet Not Included)

N/A None - STANDARD Wet End Kit - $704 ($704.00)


N/A 1 1/2" FNFT


N/A 1 1/4" MNPT

Weight (Net)

N/A 39.0 lbs. max

Shipping Weight (Packed)

N/A 42.5 lbs. max